Pallet Line for Sale

All components $65,000 – Individual component prices also available

For more info please contact Dave Smith by phone 503-669-8226 or by email dave@dieboldlumber.com

General Information: All of this system is built with heavy structural steel tubing, adjustable legs for uneven ground, sealed ball bearings on oversized shafting, quality hydraulic motors of standard interchange design. Hydraulic pressure and return lines are mandrel bent and follow the machinery layout for minimal pressure drop. This machinery is built to last.

$29K – Trimmer with infeed, conveyors below and dust collection manifold:

PreviousNext
12345

SOLD

Trimmer with infeed, conveyors below and dust collection manifold

  • 20’ over table 6 saw lumber trimmer for 2”x3” thru 2”x6” lumber
  • 5hp 3 phase arbor motors with 22” carbide saw blades. Efficient dust    shrouds with 3” ports
  • Saws have a quick adjust feature to minimize length change time loss
  • Overhead dust collection manifold with 10” outlet and knife gate and 3” flex lines
  • Built in transfer chains with hook stops, limit switch and photocells for automation
  • Built in pinch roll system with even end verification to ensure zero end trim
  • Seven star wheels with square bore position under saw blades to carry lumber segments
  • Star wheels each have four pockets and hydraulic motor with shaft mount gear reducer
  • Timing wheel mounted behind gear reducer signals adjustable proximity switches for accurate loading and discharge stop positions
  • Trimmer currently has adjustable stops for 36-7/8”, 39-7/8” and 47-7/8 board lengths
  • Operators control panel is mounted on a swing arm and controls everything from your break down hoist thru the outfeed belt conveyor. A touch screen on control panel is used for timing adjustments for breakdown hoist, transfer chains, trimmer functions and outfeed belt loading
  • “On edge” lumber discharge belt is mounted below trimmer. It has smart eyes for gap control
  • Trim end waste belt also mounts below trimmer. Both conveyors are hydraulic driven

$9K – Chamfer module and tipple conveyor:

PreviousNext
123

Chamfer module and tipple conveyor

  • Heavy plate steel construction with front access doors and tubing legs
  • Two 7.5hp 3600 rpm arbor motors with “grease lock” arbor adapters
  • Fixed lower head and movable top head with “grease lock” moulder heads
  • Removable polished bed plate and straight edges guide material thru the machine
  • Fixed vertical feed rolls and outside spring loaded vertical feed rolls all hydraulic driven
  • Dual hydraulic motors and nickel plated drive chains are torque arm mounted on top
  • Feed rolls and pivots are all mounted on replaceable sealed flange bearings
  • Chip evacuation chutes top and bottom are extremely efficient with 3” dust ports
  • Upper spring loaded hold down shoe prior to top head to eliminate knife chatter
  • Free standing control panel and mounted starter panel with safety lock out switches
  • Aluminum belt conveyor tipple on outfeed side raises up for service walk thru

$24K – Turner Resaw with soft start and spare blades:

PreviousNext
1234

Turner Resaw with soft start and spare blades

  • 48” Turner resaw with four hydraulic powered feedrolls on standard tilting table
  • 50hp drive motor with new belts and drive sheave, set for 9,000 FPM blade speed
  • New soft-start controller and local disconnect
  • Air cylinder actuated feed roll “quick-open” with remote operator control
  • All new bearings, bushings and seals throughout machine and remote grease lines
  • New style saw guides for ‘no-tools’ replacement with repeatable accuracy
  • All moving parts recently inspected and lubed, replaced as necessary
  • New paint and guards, spare blades boxed and sharpened
  • Wheels have many years of service left: Top wheel: 1”, Bottom wheel: 7/8” thickness

$13K – Splitter Conveyor, Long Belt Conveyor, #1 Landing Table, #1 Grading Chains, #2 Landing Table, #2 Grading Chains:

  • #1 Landing Table

  • #2 Landing Table (10’ away from #1 and parallel to it)

  • #1 Grading Chains

  • #2 Grading Chains

PreviousNext
1234

Splitter Conveyor:

  • 4’ long x 16” wide belt conveyor mounts very close to the saw blade
  • Conveyor has a tall steel center rib behind saw blade, makes two streams of boards
  • Conveyor has a center pivot with gas spring and locking handle for saw change/ walkthrough
  • Powered by a hydraulic motor with solenoid valve, flow control and ball valve
  • Start/Stop controls are located at both grader stations
  • This conveyor discharges onto the #1 landing table heading to the left

Long Belt Conveyor:

  • 10” wide x 8’ 10” long belt conveyor with 5.5” tall sides. Return idlers and tail take-ups
  • Powered by a hydraulic motor with solenoid valve, flow control and ball valve
  • Start/Stop controls are located at both grader stations
  • This conveyor discharges onto the #1 landing table heading to the left

#1 Landing Table:

  • Three lines of camel back chain in plastic channel, 4’ shaft centers. 39” top of chains
  • Angled landing guide plates with debris fall-out slots for smooth operation
  • Moveable backstop for centering several lengths of material
  • Overhead squaring device above head shaft, adjustable for width & height of boards
  • Powered by a hydraulic motor with solenoid valve, flow control and ball valve
  • Start/Stop controls are located at both grader stations

#2 Landing Table (10’ away from #1 and parallel to it):

  • Three lines of camel back chain in plastic channel, 4’ shaft centers. 39” top of chains
  • Angled landing guide plates with debris fall-out slots for smooth operation
  • Moveable backstop for centering several lengths of material
  • Overhead squaring device above head shaft, adjustable for width & height of boards
  • Powered by a hydraulic motor with solenoid valve, flow control and ball valve
  • Start/Stop controls are located at #2 grader station

#1 Grading Chains:

  • Two lines of C-2060 conveyor chain riding in plastic channel, spaced 24” apart.
  • 10’ 9-3/4” shaft centers, top of chain elevation is 36”, 3” lower than landing table
  • Powered by a hydraulic motor with solenoid valve, flow control and ball valve
  • Start/Stop control are in a panel located on the side of chain race near head end
  • Head end is constructed to accept tail idlers for an incline to future stackers

#2 Grading Chains:

  • Two lines of C-2060 conveyor chain riding in plastic channel, spaced 24” apart.
  • 10’ 9-3/4” shaft centers, top of chain elevation is 36”, 3” lower than landing table
  • Powered by a hydraulic motor with solenoid valve, flow control and ball valve
  • Start/Stop control are in a panel located on the side of chain race near head end
  • Head end is constructed to accept tail idlers for an incline to future stackers
Skip to content